Search
Products
    Menu Close

    AVPRO 18GBPS TRUE 4K60 4:4:4, 4X4 MATRIX W/FOUR HDMI INPUTS & FOUR MIRRORED HDBASET OUTPUTS BLOCKS.

    Manufacturer: Picture for manufacturer AVPro
    AVPRO 18GBPS TRUE 4K60 4:4:4, 4X4 MATRIX W/FOUR HDMI INPUTS & FOUR MIRRORED HDBASET OUTPUTS BLOCKS.
    SKU: AC-MX-44HDBT
    Availability:
    Richmond : 2

    Mississauga : 3
    Call for pricing

    AVPRO EDGE MATRIX SWITCHER, 4K AT 60 HZ, 18 GBPS, 100 - 240 VAC AT 50/60 HZ INPUT, 48 V/1.5 A DC OUTPUT, 38 W

    This 4X4 matrix switcher has dual outputs with HDMI and HDBaset

    The AC-MX-44HDBT is a true 4x4 HDMI/HDBaseT matrix switch. This unit includes 4 HDMI inputs and 4 HDMI/HDBaseT output blocks. These output blocks include an HDBaseT and HDMI port, these ports are mirrored, and both are active. This Matrix supports HDMI 2.0 (a/b), HDCP 2.2, up to 4K video resolution, and up to 18 Gbps bandwidth. We can pass 18Gbps through category cable by using the new HDBaseT technology we have developed called "ICT", learn more about ICT below. This switch allows any source (Blu-ray, UHD Blu-ray, satellite receiver, game consoles, PCs, etc) to be shown on any of the connected displays. This matrix equalizes and amplifies the output to ensure the HDMI signal can be transmitted through long HDMI cables without loss of quality.

    Audio Delay is "On-Board" so you can manage lip-sync issue before it is a problem. Also, with built-in scalers you don't have to forfeit that 4K signal just because you have a couple of older displays. All that with Full EDID management allows maximum flexibility with today's wide mixture of sources and displays.

    FEATURES

    • HDMI 2.0 (a/b)
    • 18 Gbps uncompressed bandwidth support on HDMI
    • 18 Gbps with ICT on HDBaseT outputs
    • 4K60 4:4:4 support
    • Full HDR support (HDR 10 and 12 bit)
    • Dolby Vision, HDR10+ and HLG support
    • HDCP 2.2 (and all earlier versions supported)
    • 1080p> 4K upscaling on HDMI outputs
    • 4K> 1080p downscaling on HDBaseT outputs
    • Advanced EDID management
    • IR, RS232 and LAN control options
    • Digital Toslink out (7CH PCM, DD, DTS)
    • Balanced analog out (2CH PCM)
    • Audio delay for digital and analog out
    • HDBaseT compatibility mode for mixed systems
    • Driver support for Crestron, C4, RTI, ELAN and more
    • Extracted audio now supports DD+, DTS Master Audio on Toslink
    • Extracted audio now Has 3 operating modes. Bound to input, bound to output, or independent matrix
    • Built-in test pattern on each output to verify infrastructure

    CERTIFICATIONS

    CE Certified, RoHS Compliant, Prop65 Warning: Cancer @www.P65Warnings.ca.gov

    SPECFICATIONS

    AC-MX-44HDBT
    Video Resolution4K at 60 Hz
    VESA ResolutionUp to DCI 4K (4096x2160)
    Color SpaceYUV (Component), RGB (CSC: Rec. 601, Rec. 709, BT2020, DCI, P3 D6500)
    Chroma Subsampling4:4:4, 4:2:2
    Color DepthUp to 16 bit (1080p), Up to 12 bit (4K)
    Supported Audio FormatHDMI: PCM 2.0 Ch, LPCM 5.1 and 7.1, Dolby Digital, DTS 5.1, Dolby Digital Plus, Dolby TrueHD, DTS-HD Master Audio, DTS-X, Dolby Atmos, Toslink: PCM 2.0 Ch, LPCM 6 CH, LPCM 7 CH,Dolby Digital, Dolby Digital Plus, DTS- Master Audio
    HDCP ComplianceHDCP 2.2
    HDMI ComplianceHDMI 2.0 (a/b)
    Connector Type(4) HDMI x (4) HDMI
    Data Transfer Rate18 Gbps
    Control TypeLAN, RS232, IR
    Operating Temperature23 - 125 deg F
    Power Supply100 - 240 VAC at 50/60 Hz Input, 48 V/1.5 A DC Output
    Power Consumption38 W
    Dimensions19.5 Inch W x 15.5 Inch D x 3.5 Inch H
    IncludesAC-MX-44HDBT (Matrix Switch), 48 V Power Supply, (1) IR Remote Control, (2) Mounting Brackets, (4) Rubber Feet, (4) 5-Pin to 2ch Audio Extraction Cable, (2) 3-Pin Terminal Blocks
    *
    *
    *
    Products specifications
    Resolution 4K HDR
    Technology HDBaseT
    Type Matrix Switcher