Search
Products
    Menu Close

    AVPRO BASIC 4K EXTENDER SET, HDMI 1.4, 4K30 (4:4:4), IR AND RS-232 CONTROL, HDCP 2.2 & EARLIER

    Manufacturer: Picture for manufacturer AVPro
    AVPRO BASIC 4K EXTENDER SET, HDMI 1.4, 4K30 (4:4:4), IR AND RS-232 CONTROL, HDCP 2.2 & EARLIER
    SKU: AC-EX70-UHD-BKT
    Availability:
    Richmond : 15

    Mississauga : 11
    Call for pricing

    AVPRO EDGE BASIC HDBASET EXTENDER KIT, 4K HDR 60 HZ, 10.2 GBPS, 4:4:4, 4:2:2, 4:2:0, 100 - 240 V AT 50/60 HZ INPUT, 12 VDC, 2 A OUTPUT, 9 W

    The AC-EX70-UHD-BKT is a 70 meter HDMI via HDBaseT receiver over single CAT-6a/7 UTP/STP.

    The AC-EX70-UHD-BKT is the basic 4K extender kit from AVPro Edge. You are able to pass 1080p HDMI signals 70 m and 4K HDMI signal 40 meters all over readily available CAT-6a cable using HDBaseT technology. This product is the ideal solutions when you need a stable HDMI signal distributed over long distances. It solves problems for both commercial and residential markets for distributing high quality content from rack to display. This kit is very easy to use and install, and works best with SDR signals.

    The HDMI extender is the most commonly used product inside video distribution channels. Commonly referred to as a balun, these tools allow integrators to take a video signal and run it anywhere throughout the installation via category cable. Extenders are used in installations from home theaters and multi zoned installations to auditoriums, stadium and college campuses. AVPro has an entire family of extension products you can find here.

    FEATURES

    • HDMI 1.4
    • 4K60 4:2:0/4K30 4:4:4 support
    • HDCP 2.2 and earlier
    • CEC pass-through
    • 12 V PoH (power over HDBaseT, only one power supply needed)
    • 3 - 20 V protection circuit built-in for safe IR transport
    • Bi-directional RS232 transport
    • LED status, link, power indication lights
    • Use single UTP/STP LAN cable (Cat6A) with substitute HDMI cable to achieve long distance transmission
    • Supports uncompressed PCM 2-channel, LPCM 5.1 and 7.1, Dolby Digital, DTS, Dolby TrueHD, DTS HD-Master Audio, Atmos on HDMI

    APPLICATIONS

    • Point-to-point HDMI extension; source in one room, display in the other
    • As an add-on to any matrix switch for long distance zone coverage
    • To carry the control signals (IR/RS232) for third party control integration for turning components on and off and switching channels, etc
    • For retrofit jobs where there is category cable already run and re-engineering is not an option
    • Cascade for ultra long distances

    CERTIFICATIONS

    CE Certified, RoHS Compliant, Prop65 Warning: Cancer @www.P65Warnings.ca.gov

    SPECFICATIONS

    AC-EX70-UHD-BKT
    TypeBasic
    InputHDMI
    OutputHDBaseT
    Video Resolution4K HDR 60 Hz
    VESA ResolutionUp to DCI 4K (4096x2160)
    Data Transfer Rate10.2 Gbps
    Chroma Subsampling4:4:4, 4:2:2, 4:2:0
    Color DepthUp to 16 bit (1080p), Up to 12 bit (4K)
    Supported Audio FormatPCM 2.0 Ch, LPCM 5.1 and 7.1, Dolby Digital, DTS 5.1, Dolby Digital Plus, Dolby TrueHD, DTS-HD Master Audio, DTS-X, Dolby Atmos
    Transmission Distance70 m (230 ft) on 1080p (Cat6A), Up to 40 m (131 ft) on 4K (Cat6A)
    Connector TypeIR, RS232
    Power Supply100 - 240 V at 50/60 Hz Input, 12 VDC, 2 A Output
    Power Consumption9 W
    Temperature Rating23 - 125 deg F
    Dimensions4.14 Inch W x 2.82 Inch D x 0.98 Inch H
    IncludesAC-EX70-UHD-BT (Transmitter), AC-EX70-UHD-BR (Receiver), (1) 12V Power Supply (Bi-directional PoH), (1) IR Tx Unit, (1) IR Rx Unit, (2) 3 Pin Terminal blocks for RS232 Ports, (4) Mounting Brackets, (8) Screws for Mounting Brackets
    *
    *
    *
    Products specifications
    Technology HDBaseT
    Resolution HDR
    Type Extender
    Product tags
    • (6038)