MXNET DECODER/RECEIVING DEVICE, 1 GIGABITES, 4K AT 60 HZ 4:4:4, 4K AT 30 HZ 4:4:4, 4K AT 60HZ 4:2:0, 120 - 240 VAC AT 50/60HZ, 0.8 A INPUT, 12 VDC, 2A OUTPUT, 9 W
This is where the signal arrives - the MXNet decoder/receiver device. Connect this to any HDMI display device, and it will decode and receive the incoming audio/video signal changing it back to an image or picture. This device connects directly via category wires (CAT 5e or better) or fiber optics to the MXNet Switch (AC-MXNET-SW48) or any other compatible multicast-capable managed L3 network switch. The AC-MXNET-1G-D is a part of the MXNet family of AV-over-IP products from AVPro Edge.
The AC-MXNET-1G-D will Decode a full 4K 4:4:4 60Hz HDMI video signal - along with audio, control, power, and HDR metadata signals. These signals are routed and passed from a single Encoder source via multicast routing through an MXNet or multicast compatible L3 managed network switch. And, it does all this with next to zero latency. MXNet decoders decode IP packets to visually lossless audio/video signals. The AC-MXNET-1G-D decoder also supports stand-alone point-to-point applications when connected directly to an AC-MXNET-1G-E encoder.
The AC-MXNET-1G-D decoder is only one part of the MXNet Ecosystem that includes encoders, network switches, control processors, and other various components designed to facilitate the building of a custom A/V distribution system. MXNet's Ecosystem includes formatting such as resolution scaling, full EDID management, HDR and Dolby Vision metadata, multi-faceted video walls, and includes the MXNet Mentor setup and control tool - making installations easy on the integrator, while also presenting a major WOW factor for your client.