Search
Products
    Menu Close

    AVPRO MXNET 48 PORT NETWORK SWITCH, 48 PORT POE+ 740 WATTS, FOUR 10GB SFP+ FIBER PORTS

    Manufacturer: Picture for manufacturer AVPro
    AVPRO MXNET 48 PORT NETWORK SWITCH, 48 PORT POE+ 740 WATTS, FOUR 10GB SFP+ FIBER PORTS
    SKU: AC-MXNET-SW48
    Availability:
    Richmond : 0
    Special Order

    Mississauga : 0
    Special Order
    Call for pricing

    MXNET 48 PORT RJ45 NETWORK SWITCH, 100 - 240 VAC AT 50/60 HZ INPUT, -52 - -57 VDC, 740 W, 364 GBPS

    The MXNet 48 port network switch is the center from which all other MXNet Ecosystem platform components revolve. The AC-MXNET-SW48 (and also AC-MXNET-SW24) pack a serious A/V performance punch with the addition of AVPro Edge's proprietary design and engineering efforts. This isn't your father's network switch, and it's also not just a simple re-configuration of multicast switch components. The AC-MXNET-SW48 includes a whole new AVPro developed network switch operating system (NOS) designed to reduce multicast processor loads and adds unique AVPro developed Intelligent A/V Processing (IAVP) technologies for more efficient multicast routing.

    The AC-MXNET-SW48 network switch is only one part of the MXNet Ecosystem that includes encoders, network switches, control processors, and other various components designed to facilitate the building of a custom A/V distribution system. MXNet's Ecosystem includes formatting such as resolution scaling, full EDID management, HDR and Dolby Vision metadata, multifaceted video walls, and includes the MXNet MENTOR setup and control tool - making installations easy on the integrator, while also presenting a major WOW factor for your client.

    Key benefits of using AC-MXNET-SW48:

    Fast Switching - Enjoy almost instant source to source switching to any receiving endpoint. On average, MXNet switches the same timing and resolution sources in less than 2 seconds with zero black frames.

    Low Latency - The average latency time between audio and video onset is around 35 ms. Anything 40 ms or less is invisible to human eyes and ears. We tested thoroughly and found that different signal types can play a role in latency, so we have our findings listed here:

    1. MXNet Point to Point (HDMI or Decoder Analog Out)

    • Less than or equal to 33 MS or 1 Frame at 30 hz

    2. MXNet Encoder (Non-Downmixing/2CH PCM Only)

    • Less than or equal to 1 MS

    3. MXNet Encoder (AVDM)

    • Less than or close to 60 MS
    • 60 MS is achieved only when downmixing high bit rate audio (Dolby TrueHD or DTS Master Audio), usually less. Anything less than 100 MS is considered unnoticeable.

    IAVP ( Intelligent A/V Processing ) - We re-engineered and optimized every system module that impacts multicast processing. That includes a complete reworking of IGMP, Jumbo Frames, Spanning Tree, and multicast filtering.

    MXNet NOS (Network Operating System) - Multicast CPU utilization has been completely reworked, resulting in amazing efficiencies. Processor loads will never exceed 40% even when the switch is fully populated. System boot times take 1 min 45 sec from a cold power up to full functionality, including POE device power-up.

    FEATURES

    • Full 48 port POE+ 740 W
    • Four 10GB SFP+ fiber ports for stacking
    • Less than 2 seconds switching time
    • Less than 40 ms latency
    • "Whisper" quiet Operation
    • AVPro Edge developed NOS (Network Operating System)
    • AVPro Edge engineered and optimized Multicast A/V firmware modules
    • IAVP - intelligent A/V processing
    • Factory pre-configured and optimized for A/V

    CERTIFICATIONS

    UL Listed, CE Certified, FCC CFR Title 47, Part 15, Subpart B, ANSI C63.4-2014, EN 55032:2015+A11:2020, EN IEC 61000-3-2:2019, EN 61000-3-3:2013+A1:2019, EN 55035:2017+A11:2020, EN 62368-1:2014 + A11:2017, Prop65 Warning: Cancer and Reproductive Harm @www.P65Warnings.ca.gov

    SPECFICATIONS

    AC-MXNET-SW48
    Type48 Port, RJ45
    Suitable For Use WithAC-MXNET-1G-D MXNet 1G Decoder/Receiving Device
    Specifications100 - 240 VAC at 50/60 Hz Input, -52 - -57 VDC, 740 W, 364 Gbps
    IncludesAC-MXNET-SW48 (Network Switch), (1) Grounding Cable, (4) Rubber Feet, (1) RS232 to Ethernet Connector, Zip Ties, (2) Mounting Brackets, (4) Large Screws, (8) Screws for Mounting Brackets
    Dimensions17.3 Inch W x 12.6 Inch D x 1.73 Inch H
    Weight11.7 lb

    SUPPORT

    File Download(s):Cut Sheet |Brochure |User Guide |
    *
    *
    *
    Products specifications
    Number of Ports 48
    PoE Enabled Yes
    Type Network Switch