Menu Close


    Manufacturer: Picture for manufacturer AVPro
    Richmond : 21

    Mississauga : 22
    Call for pricing

    AVPRO EDGE ULTRA SLIM HDBASET EXTENDER KIT, 4K HDR 60 HZ, 10.2 GBPS, 4:4:4, 4:2:2, 4:2:0, 100 - 240 V AT 50/60 HZ INPUT, 48 VDC, 0.5 A OUTPUT (WALL VERSION), 48 VDC, 0.625 A OUTPUT

    The AC-EX70-UHD-KIT uses proven HDBaseT technology to reliably transport HDMI HD and UHD signals up to 70 m over a single, twisted-pair category 5E, 6, 6A or 7 cable.

    AVPro Edge continues to set the standard for video excellence in HDMI extension solutions with no better real-world example of unbeatable performance at a cost-conscious price than our AC-EX70-UHD-KIT. With a compact, mechanically minimal footprint for ease of placement, the pencil-thin AC-EX70-UHD-KIT has deservedly earned its reputation as a mainstay in our extender lineup with a proven track record for unparalleled reliability and flawless transport of HD and UHD video signals.

    The AC-EX70-UHD-KIT provides uncompressed signal delivery (up to the HDBaseT maximum of 10.2 Gbps) from intermediate thru moderate distances determined by signal type, for around-the-clock, failure-free operation in mission critical commercial environments like Control Rooms, Data Centers, Conference Rooms, or educational campuses. Referencing Cat6A wire, 1080p HD signals confidently travel point-to-point, two hundred and thirty feet, and 4K UHD signals 4K60 4:2:0 or 4K30 4:4:4, accurately navigate one hundred fifteen feet. VESA resolutions up to QSXGA are also transportable. Power for the kit is bidirectional and may be applied at the transmitter or receiver chassis locations.

    Creative residential applications might include using a former IR control wire at a projector replacement location to retire a DVI or first generation HDMI cable, and then taking advantage of the AC-EX70-UHD-KIT onboard IR pass-through or RS232 communication bus for sending control signals to the new projector. Patio TVs maintain a sleek, uncluttered appearance using the AC-EX70-UHD-KIT, able to be easily and securely covered, as source products remain indoors eliminating low hanging, clumsily-fashioned accessory shelves. System operation is conveniently exchanged by the bantam-sized AC-EX70-UHD-KIT's bidirectional control options. ESD (electrostatic discharge) protection adds a welcomed layer of defense for all connected products.

    Never again will you become perplexed by fussy EDIDs in displays or repeaters such as AVRs with the AC-EX70-UHD-KIT's engineered-in, problem-solving EDID management. Fourteen pre-configured common EDIDs for legacy HD and newer UHD 4K displays reside onboard, plus EDID copy and EDID bypass, all available to conquer quirks in system synergy.


    • HDMI 2.0
    • EDID management
    • Supports 3D
    • HDCP 2.2 and earlier
    • CEC pass-through
    • 48 V PoH (power over HDBaseT, only one power supply needed)
    • I-Pass feature for control system "pass-through"
    • 3 - 20 V protection circuit built-in for safe IR transport
    • Bi-directional RS232 transport
    • LED status, link, power indication lights
    • Use single UTP/STP LAN cable (CAT-5E/6A) with substitute HDMI cable to achieve long distance transmission
    • Supports uncompressed PCM 2- Ch., LPCM 5.1 and 7.1, Dolby Digital, DTS, Dolby TrueHD, DTS HD-Master Audio, Atmos on HDMI
    • ESD protection circuitry (inputs and outputs) to 7 KV
    • Can cascade


    • Point-to-point HDMI signal extension - sending signal from a source that is a greater distance away from the intended display than a traditional HDMI cable can accommodate or by using pre-existing category cabling where new HDMI cable installation is not possible
    • In addition to a Video signal, IR and RS232 control communications for system operational functions extend into the same zone as the display or projector
    • HDMI extension from a non-HDBaseT HDMI matrix switch to an outlying display or projector
    • Absent a video signal, the bidirectional control signal capability of the AC-EX70-UHD-KIT can solve a unique dilemma when IR and RS232 signals are required to be exchanged between two locations when only a single category wire is available. Signal "Send" from one-way only devices at each end otherwise results in data collision. The HDBaseT protocol of the AC-EX70-UHD-KIT supplies an out-of-the-box remedy to conflicting IR and RS232 data paths


    CE Certified, RoHS Compliant, Prop65 Warning: Cancer


    TypeUltra Slim
    Video Resolution4K HDR 60 Hz
    VESA ResolutionUp to 2560x2048 (QSXGA)
    Data Transfer Rate10.2 Gbps
    Chroma Subsampling4:4:4, 4:2:2, 4:2:0
    Color DepthUp to 12 bit with 4K
    Supported Audio FormatPCM 2.0 Ch, LPCM 5.1 and 7.1, Dolby Digital DTS 5.1, Dolby Digital Plus, Dolby TrueHD
    Transmission Distance70 m (230 ft) on 1080p (Cat6A), Up to 40 m (131 ft) on 4K (Cat6A)
    Connector TypeIR, RS232
    Power Supply100 - 240 V at 50/60 Hz Input, 48 VDC, 0.5 A Output (Wall Version), 48 VDC, 0.625 A Output (Table Top Version)
    Power Consumption7.5 W
    Temperature Rating23 - 95 deg F
    Dimensions3.93 Inch W x 3.15 Inch D x 0.47 Inch H
    IncludesAC-EX70-UHD-T2 (Transmitter), AC-EX70-UHD-R2 (Receiver), 48 V Power Supply (One Supplied as Rx is Powered by Tx), (1) IR Emitter Unit, (1) IR Eye Unit, 3.5 mm Stereo Plug to Male DB9 for RS232 to Serial Port, 3.5 mm Stereo Plug to Female DB9 for RS232 to PC, (4) Mounting Brackets, (8) Screws for Mounting Brackets
    Products specifications
    Technology HDBaseT
    Resolution HDR
    Type Extender Kit