BINARY - HDMI 4X4 MATRIX SWITCHER WITH SIMULTANEOUS HDMI AND HDBASET OUTPUTS WITH POC

Binary™ HDMI Matrix Switcher - POC enabled

Our ultra-reliable Binary Matrix Switcher is now power-over-cable (POC) enabled, so the matrix powers the receiver. Of course it’s still built on the same principles that put Binary on the map: custom install expertise, innovative technology, and ease-of-use. It even comes equipped with everything needed for control system integration: Ethernet, RS-232 control, and IR routing to boot. It uses a single Cat5e/6 cable to transmit HDMI signals and bidirectional IR - up to 230 ft. Plus, supplied rack ears make mounting easy.

Shielded Cable Recommendation - Although HDBaseT transmission technology is much less susceptible to EMI interference than other transmission technologies, if possible, it is recommended that you pull shielded Cat5e/Cat6 with this product for maximum reliability. Please note: for proper shielding, shielded connectors must be used with drains connected at both ends. In addition, “EZ end” connectors are not recommended for use with HDMI extenders.

Power Supply Voltage - Please use the 12V power supply included in the package. Use of power supply with a different voltage may cause damage to the product or the power supply.

POC Enabled

This feature powers all the receivers from the matrix switchers. This means there is not need of power supplies on the Receiver side.

HDMI® with 3D

Your covered with full support of the HDMI® (with 3D), Deep Color (36bit) and HDCP 1.4 as well as support for Dolby® True HD, Dolby® Digital Plus, DTS™-HD Master and LPCM audio formats.

EDID Management

EDID settings can be configured using the included remote control or convenient PC configuration utility. Three EDID modes are provided for ultimate flexibility - Auto, Embedded and Learning.