Personal menu

CROWN - ANALOG + BLU LINK INPUT, 2 CHANNEL, 600W PER OUTPUT CHANNEL

SKU: CDI-2-600BL

Availability:

Richmond : 0

Special Order

Mississauga : 0

Special Order

Call for pricing

Overview
Features
Specifications
Support
Contact Us

CROWN 600BL CDI DRIVECORE SERIES AUDIO POWER AMPLIFIER WITH BLU LINK, 2-CHANNEL, 600 W AT 4 OHM

The CDi DriveCore Series is an evolution in amplification, providing an impressive mix of high-performance; rich feature set, and competitive cost. Using technology derived from our flagship Installed Sound amplifier (Crown DriveCore Install series), the CDi DriveCore 2|600BL offers streamlined functionality to work in almost any medium sized installation such as cinema, houses of worship, bars, lounges, and more. Designed for ease-of-use in a variety of applications, the 2|600BL is a 2-channel amp that includes network control/monitoring, high-level DSP, front-panel interface, and support for driving up to 100Vrms speaker loads without requiring a transformer. The 2|600BL also comes with BLU link, adding the ability to send and receive channels over HARMAN's digital audio BUS. The entire CDi DriveCore line comes pre-loaded with JBL speaker tunings to help make installations quicker and easier.

FEATURES

DriveCore Technology - Crown's proprietary DriveCore technology eliminates hundreds of components within each amplifier, reducing the variability of component values, increasing reliability, resulting in incredible audio fidelity from an efficient design.

Network Control and Monitoring - Through Harman's HiQnet Audio Architect software, the CDi DriveCore can be controlled, configured, and monitored through standard TCP/IQ network.

DSP - On-board Digital Signal Processor in each amplifier allows for custom configuration

Input Router
Input Delay - Up to 1000ms
Input Parametric EQ - 8 band
Crossover
Output Parametric EQ - 8 band
Output Delay - Up to 100ms
LevelMAX Limiter

BLU link (BL models only) - Both receive and send channels over HARMAN's 256 channel, fault-tolerant audio BUS, BLU link

Direct Drive 70/100 Vrms Output - Each output channel is capable of provide either 70V or 100V for high impedance applications.

Front-Panel Interface - Completely configure the amplifier using an intuitive front-panel interface.

GPIO/AUX Port - Recall presets, mute channels, monitor faults, power on/off the amplifier, and more through a combined GPIO/AUX Port.

Pre-loaded Speaker Tunings -For quicker and easier setup and installation.

CDI-2-600BL
Sub Brand	Crown
Series	CDi DriveCore
Model	600BL
Number of Channels	2
Power Output	600 W at 4 Ohm, 600 W 70 Vrms (Dual Mode), 600 W at 4 Ohm, 1200 W 140 Vrms (Bridge Mono Mode)
Input Impedance	20 kOhm Balanced, 10 kOhm Unbalanced
Sensitivity	0.7 Vrms at 8 Ohm
Total Harmonic Distortion	0.35% at 20 Hz - 20 kHz
Signal-to-Noise Ratio	>104 dB (100 V, 20 Hz - 20 kHz at 8 Ohm)
Damping Factor	>1000 at 20 - 100 Hz
Frequency Response	20 Hz - 20 kHz (+/-0.5 dB, 8 Ohm)
Crosstalk	>80 dB at 20 Hz - 1 kHz
Digital Signal Processing	96 kHz, 32-Bit Floating Point
Voltage Gain	34 dB
BLU Link Signal-to-Noise Ratio	>108 dB (100 V, 20 Hz - 20 kHz)
AC Line Voltage	100 - 240 VAC at 50/60 Hz
Connector Type	(2) Balanced Audio Input (Terminal Block), (2) Speakers Output (Screw-Type), LAN (RJ-45), GPIO, BLU Link Input (RJ-45), BLU Link Output (RJ-45)
Indicators	LED
Display	LCD
Rack Spacing	2U
Dimensions	19 Inch W x 13.55 Inch D x 3-1/2 Inch H
Weight	14.56 lb

File Download(s):Cut Sheet |User Guide |

Your name *

Your email *

Enquiry *

Products specifications

Amplifier Type	8 Ohm
Bridgeable	Yes
Watts Per Channel	500W+
Channels	2-Channel
Type	Amplifier
Series	CDI

Product tags

(6094)

CROWN - ANALOG + BLU LINK INPUT, 2 CHANNEL, 600W PER OUTPUT CHANNEL

CROWN 600BL CDI DRIVECORE SERIES AUDIO POWER AMPLIFIER WITH BLU LINK, 2-CHANNEL, 600 W AT 4 OHM

FEATURES

System Design

RMA Request Form

Staub Shipping Desk

Payment options