Search
Products
    Menu Close

    EPISODE - 1000W X 2 CHANNEL IP-ENABLED AMPLIFIER (70V - 8 OHMS)

    Manufacturer: Picture for manufacturer Episode Electronics
    EPISODE - 1000W X 2 CHANNEL IP-ENABLED AMPLIFIER (70V - 8 OHMS)
    SKU: EA-AMP-HYB-2D-2000
    Availability:
    Richmond : 2

    Mississauga : 1
    Next ETA: 2024-04-11 QTY: 3
    Call for pricing

    Episode 70V/8-ohm IP-Enabled Amplifier

    Why pay a premium for just a brand name? This high-power hybrid 70V/8-ohm digital amplifier with IP control comes with OvrC cloud management, versatile inputs/outputs, and a compact form factor. But don't be fooled by its small size – this amp packs a serious punch and has the build quality to last years in your rack. You’ll find this amp is right at home in so many applications, including churches, gyms, restaurants, landscape, and large distributed audio systems.

    Important Note - Episode Hybrid Amplifiers will be out of stock through August 2022. More information about alternative solutions to support high performance landscape systems can be found here.
    Important Note - This firmware update requires a two-step update process. Both steps must be completed for a successful update.


    Episode Electronics  OVRC banner
    Cloud Control

    Claim this amp in our exclusive cloud management platform, OvrC. Using OvrC, you can access the amp remotely to make configuration changes in the UI and easily update the firmware, which will send you alerts if there are any issues at the customer site.

    Adjustable Inputs & Outputs

    Balanced and unbalanced analog inputs plus digital inputs allow you to use this amp without a CLEANBox Pro. The adjustable input gain settings let you input a wide range of source levels, including mic level, line level, and pro audio - simply adjust the input level in the UI to match the source. Plus, with loop outs, you always have the option to stack these amps to gain more power and easily loop the wiring.

    Control System Integration

    Designed for the custom integrator, this amp is unique in that it easily integrates with control systems. Equipped with options for serial, IP, IR, and OvrC cloud control options, this amp is not only a breeze to automate, it’s also easily configured during your install. And with a full set of pre-built drivers, it’s just a matter of dropping in a file to integrate the amp with the control system of your choice.

    Compact 1U Design

    Get tons of features in an ultra-compact form factor. Our sleek 1U design takes up little of your valuable rack space, and included rack ears make the amp easy to install.

    Pre-loaded DSP Settings

    To ensure this amp works perfectly with our landscape speaker systems, we've pre-loaded a host of DSP settings. Plus, the new UI and front panel allow for easy recall, so that the new system will sound amazing in a matter of minutes.

    Versatile Configurations

    This professional amplifier delivers premium performance for even the largest speaker systems. Install high-powered versatility, with two configurable output channels to support 70V, 8-ohm, and hybrid configurations (2-ohm minimum).

    Build Quality

    We knew that to compete in the high-powered pro audio space, we had to build this amp with premium quality from the ground up. Our amp has been through extensive testing in high-stress environments to ensure it's up to the task.

    Bring the Bass

    The 2-channel configuration of this amp allows for simultaneously powering a large number of 70V speakers and high-powered subs, like our Episode® Landscape Series Burial Subwoofersand Episode® Landscape Series Hardscape Subwoofers. Our detailed install instructions make integrating an amp with our subwoofers easy, giving you increased performance and earth-shattering low notes with zero hassle.

    Audio Sense & 12V Trigger

    Audio-sense is perfect for connecting to an audio source or mixer – when the source turns off, the amplifier will gracefully go into a power-saving standby mode. The 12V trigger inputs allow you to use a mixer or control system to turn the amp on or off or have it "wake up" another device when the amp is activated.

    Perfect for Landscape

    If you’re installing an outdoor landscape system, then this Episode amp is a must-have. It’s pre-programmed to work with Episode Landscape Speakers and Subwoofers, and fits perfectly with both 70V and 8-ohm systems.

    FEATURES

    • Preset DSP Settings and Customizable EQs
    • Amp supports hybrid 70V/8-ohm systems

    SPECIFICATIONS

      EA-AMP-HYB-2D-1000 EA-AMP-HYB-2D-2000
    Channels 2-Channel 2-Channel
    Power Output 300W per channel @ 8 ohm (1000W bridged)
    500W per channel @ 4 ohm (2000W bridged)
    700W per channel @ 2 ohm
    500W per channel @ 70V
    500W per channel @ 100V (230VAC only)
    600W per channel @ 8 ohm (2000W bridged)
    1000W per channel @ 4 ohm (2800W bridged)
    1200W per channel @ 2 ohm
    1000W per channel @ 70V
    1000W per channel @ 100V (230VAC only)
    Power Consumption 230W Typical
    1100W Max
    Sensitivity Input 1.4Vrms, max power 1.4Vrms, max power
    Impedance Input RCA Analog input: 10kΩ
    Balanced Analog input: 20kΩ
    RCA Analog input: 10kΩ
    Balanced Analog input: 20kΩ
    Signal to Noise Ratio 101dB A-weighted @ 1.4Vrms & 4Vrms input max 101dB A-weighted @ 1.4Vrms & 4Vrms input max
    Total Harmonic Distortion (THD) Less than 1% Less than 1%
    Frequency Response ± 2dB at 1/8th power (20Hz to 20kHz) ± 2dB at 1/8th power (20Hz to 20kHz)
    Inputs Network: RJ-45 jack, 10/100Mbps Network: RJ-45 jack, 10/100Mbps
    Audio Inputs / Outputs Bal. Analog Audio: 2x 3-pos. Phoenix-style pluggable screw term. block
    Analog RCA: White jack (L Ch), Red jack (R Ch)
    Spkr. Output: 2x 3 pos. Phoenix-style pluggable screw term. block (12-18 AWG)
    Bal. Analog Audio: 2x 3-pos. Phoenix-style pluggable screw term. block
    Analog RCA: White jack (L Ch), Red jack (R Ch)
    Spkr. Output: 2x 3 pos. Phoenix-style pluggable screw term. block (12-18 AWG)
    12V Trigger 3.5mm mono jack 3.5mm mono jack
    Dimensions (W x H x D) 17" x 1.75" x 12" 17" x 1.75" x 12"
    Rack Spacing 1U 1U
    Weight 12 lb 12 lb
    *
    *
    *
    Products specifications
    OvrC Enabled Yes
    Control IP/IR
    Amplifier Type 70V/8 Ohm
    Bridgeable Yes
    Watts Per Channel 500W+
    Channels 2
    Type Amplifiers
    Product tags