Search
Products
    Menu Close

    EPISODE - RESPONSE SERIES DSP AMPLIFIER | 200W X 2 CHANNELS

    Manufacturer: Picture for manufacturer Episode Electronics
    EPISODE - RESPONSE SERIES DSP AMPLIFIER | 200W X 2 CHANNELS
    SKU: EA-RSP-2D-200
    Availability:
    Richmond : 0
    Special Order

    Mississauga : 0
    Special Order
    Call for pricing

    Episode Response Series DSP Amplifiers

    This Episode Response Series amplifier takes multiroom audio to the next level, giving pros a DSP amp that delivers incredible audio in a single zone. This amp utilizes high-tech digital signal processing, a single analog input and bridgeable speaker output to provide clean and accurate audio in any space. It is also IP controlled, OvrC compatible, and has drivers for all popular control systems for an easy-to-control audio experience. With this amp, simply add a source and you're set.

    Clean and Fast Installs

    Save space and time with the Response Series amps. It has a pre-amp, DSP, matrix switch, and amplification built-in to a single chassis, which saves rack space and cuts down on wiring to make your job easier - all while delivering superior sound.

    Benefits of a Digital Signal Processor

    Digital Signal Processor, or DSPs, are essential in creating great sound. The built-in DSP delivers stellar audio in a variety of spaces with its onboard 10-band parametric EQ, letting you and your customer find the perfect sound via a browser UI.

    Control System Integration

    Response Series amps easily integrate with Control4 and other popular control systems. With a full set of pre-built drivers, it's just a matter of dropping in a file to integrate with the control system of your choice.

    IP Controlled

    Equipped with IP control, this amp is not only a breeze to automate, but it's also easily configured during your install, giving you and your customers a flawless experience with easy monitoring and control. For legacy installs, control Response Series amps with the built-in IR port.

    Sub Out in Every Zone

    Dedicated subwoofer outputs per zone make wiring and configuration simple and fast, letting you add an Episode architectural subwoofer and digital subwoofer amplifier to any room. Adding a subwoofer gives your customers full-frequency audio that delivers a rich and full audio experience that's incredibly accurate and satisfying.

    Smart and Powerful

    This amp pumps out 200 watts per channel at 4-ohm and 100 watts at 8-ohm for powerful multiroom audio. Additionally, each Response Series amp is IP controlled, OvrC enabled, and features Signal Sensing and a 12v trigger for power saving - making these amps easy to integrate and easy to use.

    Reliable Amplification

    These amps feature an active variable/dynamic cooling system to increase longevity. They also feature anti-clipping technology that protects both the amp and speakers from being overdriven. Rackmount ears are included and pre-installed for easy mounting.

    Superior Sound

    Built-in Signature by Episode presets make these amps the perfect match for our flagship speaker line, delivering the best sound every time. Plus, you can create, backup, and upload custom presets using built-in test signals and audio analytics. And for detailed audio, each amp has an adjustable low-pass/high-pass filter when using subwoofers.

    FEATURES

    • High-powered DSP amplifier
    • Single analog input and bridgeable speaker output

    Specifications

    EA-RSP-2D-200
    Impedance Input RCA analog input: 22k Ohm
    Power Output @ 4 ohm

    2 channels driven: 2 x 200W 1 kHz

    All Channels: 2 x 200W 1 kHz

    Power Output @ 8 ohm

    2 channels driven: 2 x 100W 1 kHz

    All Channels: 2 x 100W 1 kHz

    Power Output Bridged @ 8 ohm 1 x 400W 1 kHz
    Sensitivity Input 1 Vrms
    Topology Class D
    Total Harmonic Distortion (THD) 0.01% 1 kHz @1/8 rated power 4 ohm or 8 ohm
    Connector Type 1 x RJ45 (ethernet), Stereo RCA inputs, 1x Analog loop output, 2 channels: 1 stereo or bridged output Speaker outputs
    Fan Description Fanless (passive) cooling
    Frequency Response 20 Hz - 20 kHz < +- 2 dB
    Power Connection Type NEMA 5/15P 3 prong to IEC 60320 C13, 1.8m length
    Certifications UL, CE, FCC
    Dimensions 16.5 x 8.3 x 1.8 in. (420 x 211 x 44.5 mm)With feet: 16.5 x 8.3 x 2.2 in. (420 x 211 x 56 mm)
    Operating Humidity 20-90% RH
    Operating Temperature -10 to +50 Deg C (+14 to +122 Deg F) (indoor)
    Certifications UL, CE, FCC
    Power Consumption 200W
    Storage Temperature -30 to +70 Deg C (-22 to +158 Deg F)
    Weight 7.93 lb (3.6 kg)
    Signal to Noise Ratio >95 dB A-weighted @ rated power
    Nominal Impedance 1 ohm
    RJ45 Auto Sensing 2.5 mVrms
    LED Indicators

    Front power LED: 1x Blue LED light bar

    System status LED: 2x Bi-color LED

    Dynamic Range > 100 dB A-weighted @ rated power
    Channels 2-Channel
    *
    *
    *
    Products specifications
    OvrC Enabled Yes
    Amplifier Type 8 Ohm
    Bridgeable Yes
    Channels 2
    Watts Per Channel 101-200W
    Control IP
    DSP Yes
    Type Amplifiers
    Product tags