Search
Products
    Menu Close

    SYMETRIX - RADIUS PROGRAMMABLE DSP, 4 MIC/LINE IN, 4 LINE OUT, USB AUDIO, 1 I/O CARD SLOT, NO DANTE

    Manufacturer: Picture for manufacturer Symetrix
    SYMETRIX - RADIUS PROGRAMMABLE DSP, 4 MIC/LINE IN, 4 LINE OUT, USB AUDIO, 1 I/O CARD SLOT, NO DANTE
    SKU: SYM-NX-4X4-ND
    Availability: Special Order
    Call for pricing

    SYMETRIX RADIUS NX SERIES ADVANCED DIGITAL SIGNAL PROCESSOR, 4 INPUT, 4 OUTPUT, 20 HZ - 20 KHZ (+/-0.5 DB)

    FEATURES

    Two models

    Radius NX 4x4 (4 analog inputs, 4 analog outputs) and radius NX 12x8 (12 analog inputs, 8 analog outputs). Both feature optional factory installed 64x64 redundant DanteTM and identical DSP resources. The two differ only in analog I/O, logic output and external control input capacity. The reduced cost of the 4x4 makes it extremely competitive in applications where many DanteTM endpoints are routed to a primary DSP and fewer analog connections are required. Models without DanteTM provide even more accessible DSP pricing for smaller systems.

    Optional user installed virtualized and scalable AEC coprocessor module

    For conferencing applications the dual-core coprocessor provides up to 16 channels of full bandwidth AEC with unparalleled clarity and intelligibility.

    USB audio port

    Enables soft-codec conferencing and computer-based multitrack recording or playback.

    USB host port

    Supports recording, audio media playback and digital messaging.

    128x128 super matrix

    A next-generation SHARC dual-core processor enables a composer super matrix - placing the burden of large matrices in one core while freeing the second core for general purpose signal processing - making it possible to design very large and complex systems around a single radius NX. View modes make navigating through large matrices a breeze.

    Configurable 4-port gigabit switch

    Services both DanteTM (when installed) and control networks, eliminating or reducing the need for external switches while avoiding 100 Mb bottlenecks.

    Ultra-low noise preamps

    Digitally controlled 3 dB steps facilitate precise gain setting resulting in unmatched sound quality.

    Option card slot

    Accepts all user installed radius and edge expansion cards, maximizing radius NX input/output counts or adding special purpose functionality to reduce total system cost.

  • Optional DanteTM 64x64 DanteTM module.
  • Optional AEC coprocessor module - up to 16 channels
  • USB audio port enables soft-codecs + record/playback
  • Dedicated routing resources for a 128x128 super matrix
  • 4-port gigabit switch serves DanteTM + control networks
  • Ultra-low noise preamps with 3 dB gain steps
  • Support for radius and edge expansion cards
    • CERTIFICATIONS

      e Safety: UL 60065, cUL 60065, IEC 60065 EMC: EN 55103-1, EN 55103-2, EN55032, EN 61000-3-2, EN 61000-3-3, ICES-003, FCC Part 15 (all class A) Environmental: RoHS

    SYM-NX-4X4-ND
    SeriesRadius NX
    TypeAdvanced
    Number of Inputs4
    Number of Outputs4
    Input Connector TypeSwitchable Balanced Mic or Line Level
    Output Connector TypeBalanced Line Level
    Mic Pre-Amp Gain0 - 51 dB
    Nominal Input Level4 dBu
    Maximum Input Level24 dBu
    Nominal Output Level4 dBu with 20 dB of Headroom
    Maximum Output Level24 dBu
    Input Impedance2 kOhm (Balanced), 1 kOhm (Unbalanced)
    Output Impedance300 Ohm (Balanced), 150 Ohm (Unbalanced)
    Phantom Power48 VDC, 10 mA (Maximum)
    Frequency Response20 Hz - 20 kHz (+/-0.5 dB)
    Power Supply24 VDC, 50 mA
    Power Consumption60 W
    Sampling Rate48 kHz
    Dynamic Range>114 dBA
    Total Harmonic Distortion<-95 dBu at 1 kHz
    Latency1.04 msec
    Dimensions18.91 Inch W x 9.5 Inch D x 1.72 Inch H
    IncludesNorth American (NEMA) and Euro IEC Power Cable, Detachable 3.5 mm Terminal Block Connectors, Quick Start Guide
    File Download(s):Cut Sheet |Brochure |Brochure-1 |User Guide |
    *
    *
    *