Search
Products
    Menu Close

    SYMETRIX - RADIUS NX 12X8, 12 IN, 8 OUT WITH DANTE

    Manufacturer: Picture for manufacturer Symetrix
    SYMETRIX - RADIUS NX 12X8, 12 IN, 8 OUT WITH DANTE
    SKU: SYM-NX-12x8-DANTE
    Availability:
    Richmond : 0
    Special Order

    Mississauga : 0
    Special Order
    Call for pricing

    Radius NX

    Two models.  Radius NX 4×4 (4 analog inputs, 4 analog outputs) and Radius NX 12×8 (12 analog inputs, 8 analog outputs). Both feature optional factory installed 64×64 redundant Dante and identical DSP resources. The two differ only in analog I/O, logic output, and external control input capacity. The reduced cost of the 4×4 makes it extremely competitive in applications where many Dante endpoints are routed to a primary DSP and fewer analog connections are required. Models without Dante provide even more accessible DSP pricing for smaller systems.

    Optional user installed virtualized and scalable AEC coprocessor module.  For conferencing applications the dual-core coprocessor provides up to 16 channels of full bandwidth AEC with unparalleled clarity and intelligibility.

    USB audio port.  Enables soft-codec conferencing and computer-based multitrack recording or playback.

    USB host port.  Supports recording, audio media playback, and digital messaging.

    128×128 Super Matrix.  A Next-generation SHARC Dual-core Processor enables a Composer Super Matrix – placing the burden of large matrices in one core while freeing the second core for general purpose signal processing – making it possible to design very large and complex systems around a single Radius NX. View modes make navigating through large matrices a breeze.

    Configurable 4-port gigabit switch.  Services both Dante (when installed) and control networks, eliminating or reducing the need for external switches while avoiding 100 Mbit bottlenecks.

    Ultra-low noise preamps.  Digitally controlled 3 dB steps facilitate precise gain setting resulting in unmatched sound quality.

    Option card slot.  Accepts all user installed Radius and Edge Expansion Cards, maximizing Radius NX input/output counts or adding special purpose functionality to reduce total system cost.

    FEATURES

    • Two models: Radius NX 4×4 and Radius NX 12×8.
    • Optional Dante 64×64 Dante module.
    • Optional AEC coprocessor module - up to 16 channels.
    • USB audio port enables soft-codecs + record/playback.
    • Dedicated routing resources for a 128×128 Super Matrix.
    • 4-port Gigabit Switch serves Dante + control networks.
    • Ultra-low noise preamps with 3 dB gain steps.
    • Support for Radius and Edge Expansion Cards.
    • Microsoft Teams Compatible.

    SPECIFICATIONS

    General Specifications
    Processor1 x Analog Devices Griffin ADSP-SC587 dual- core DSP @ 500 MHz
    Raw processing capacity500 MIPS, 6 GFLOPS, 2 GMACS
    Sampling rate48 kHz, ± 100 ppm.
    Frequency response (A/D/A)20 Hz – 20 kHz, ± 0.5 dB.
    Dynamic range (A/D/A)> 114 dB, A-weighted.
    Channel separation (A/D/A)> 110 dB @ 1 kHz, +24 dBu
    Latency (A/D/A)1.04 ms, inputs routed to outputs
    Delay memory174 mono seconds.
    Analog control inputs0-3.3 VDC.
    Recommended external control potentiometer10k Ohm, linear.
    Logic outputsLow (0V) when active, pulled high (5V) when inactive.
    Logic output maximum external power supply voltage / current sinking24 VDC / 50 mA.
    Logic output maximum output current10 mA.
    THD + Noise‹ -95 dB (22.4 kHz BW, unweighted); 1 kHz @ +15 dBu with 0 dB gain
    RS-232 accessory serial I/O57.6 kbaud (default), 8 data bits, 1 stop bit, no parity, no flow control wired straight-through, only pins 2, 3, and 5 required
    RS-485 serial I/O38.4 kbaud (default) 8 data bits, 1 stop bit, no parity, no flow control. May be broken out of ARC port
    Ethernet CableStandard CAT5/6, maximum device to device length = 328 feet / 100 meters
    Dante CableStandard CAT6, maximum device to device length = 328 feet / 100 meters
    ARC CableStandard CAT5/6, distance dependent upon load and number of devices
    Maximum stored presets1000
    ModelsRadius NX 12x8 USB-B, Radius NX 12x8 Dante + USB-B
    AEC (if installed)*
    Number of ChannelsDual-core module: For standard conferencing, up to sixteen (16) channels with two (2) references. For mix-minus applications, up to eight (8) channels with eight (8) references. Single-core module: For standard conferencing, up to eight (8) channels with one (1) reference. For mix-minus applications, up to four (4) channels with four (4) references.
    Tail Length400 mS maximum, dependent on channel and reference count
    Convergence RateTypically > 90dB/sec
    Latency11 mS
    Processors1 x Analog Devices Griffin ADSP-21584 dual-core DSP @ 500 MHz
    Raw processing capacity500 MIPS, 6 GFLOPS, 2 GMACS
    *Optional coprocessor module required, single-core or dual-core models are available.
    Analog Inputs
    Connectors3.81 mm terminal blocks.
    Number of inputsTwelve (12) switchable balanced mic or line level
    Nominal input level+4 dBu
    Maximum input level+24 dBu
    Mic Pre-amp Gain0 to 51 dB in 3 dB steps with ± 24 dB digital trim
    Mic Pre-amp EIN< -125 dB with 150 Ohm source impedance, 22.4 kHz BW
    CMRR> 50 dB @ 1 kHz, unity gain
    Input impedance2k Ohms balanced, 1k Ohms unbalanced
    Phantom Power (Per Input)+48 VDC @ 10 mA maximum.
    Dynamic range> 115 dB, A-weighted.
    THD + Noise< -100 dB (22.4 kHz BW, unweighted); 1 kHz @ +15 dBu with 0 dB gain.
    Latency0
    Analog Outputs
    Connectors3.81 mm terminal blocks.
    Number of outputsEight (8) balanced line level.
    Nominal output level+4 dBu with 20 dB of headroom.
    Maximum output level+24 dBu (+22.8 dBu into a 2 k Ohm minimum load).
    Output impedance300 Ohms balanced, 150 Ohms unbalanced.
    Dynamic range> 117 dB, A-weighted.
    THD + Noise< -97 dB (22.4 kHz BW, unweighted); 1 kHz, 0 dB gain +8 dBu output
    Latency0.65 mS.
    USB Audio I/O
    ConnectorOne (1) high-retention Type B
    Interface2.0 with Audio class 1.0 legacy modes
    Capacity1x1 (echo cancelling speakerphone and non-echo cancelling speakerphone modes) - driverless, 2x2 line I/O mode - driverless, and 8x8 line I/O mode - driver included
    Sample Rate48 kHz
    Bit Depth16-bit, speakerphone modes; 16 or 24-bit, line modes
    Mechanical Data
    Space Required1U (WDH: 18.91 in. x 9.5 in. x 1.72 in. / 48.02 cm x 24.13 cm x 4.37 cm). Depth does not include connector allowance. Allow at least 3 inches additional clearance for rear panel connections. Additional depth may be required depending upon your specific wiring and connections.
    Electrical100-240 VAC, 50/60 Hz, 60 Watts maximum, universal input.
    VentilationMaximum recommended ambient operating temperature is 30 C / 86 F. Ensure that the left and right equipment sides are unobstructed (5.08 cm, 2 in. minimum clearance). The ventilation should not be impeded by covering the ventilation openings with items such as newspapers, tablecloths, curtains, etc.
    Shipping Weight8.5 lbs. (3.85 kg)
    Certifications or ComplianceSafety: UL 60065, cUL 60065, IEC 60065 EMC: EN 55103-1, EN 55103-2, EN55032, EN 61000-3-2, EN 61000-3-3, ICES-003, FCC Part 15 (all Class A) Environmental: RoHS

    SUPPORT

    Manuals and Guides
    Sales Resources
    *
    *
    *
    Products specifications
    Control IP/RS-232
    Technology Dante
    Inputs Outputs 12 x 8
    Series Radius NX
    Type Matrix DSP Mixer
    Product tags
    • (6105)