Search
Products
    Menu Close

    WATTBOX - RACK MOUNT OVRC UPS - 2000 VA - *20 AMP AC PLUG*

    Manufacturer: Picture for manufacturer WattBox
    WATTBOX - RACK MOUNT OVRC UPS - 2000 VA - *20 AMP AC PLUG*
    SKU: WB-OVRC-UPS-2000-1
    Availability:
    Richmond : 3

    Mississauga : 5
    Call for pricing

    WattBox® UPS Battery Pack for IP Power Conditioners | 2000 VA

    The WattBox® Uninterruptible Power Supply (UPS) battery pack is loaded with features to help keep vital equipment up and running in the case of power loss. This Pure Sinewave UPS provides battery backup and full automatic voltage regulation (AVR) to prevent costly interruptions, as well as a 'Graceful Shutdown' of a connected PC via USB port. By using the single outlet to back up a WattBox IP power conditioner, you can receive system OvrC updates, which allow you to monitor power and perform basic functions like load shedding configuration. With this model, you’ll get a 2000 VA capacity, up to 5:30 min of battery backup at full load (1560W), and 15:30 minutes of battery backup at 45% load (720W).

    Using OvrC - To access OvrC, this product must be paired with a compatible IP-enabled WattBox power conditioner updated with the latest firmware.
    Critical Specifications - Product ships with an IEC power cord with a 20A plug. Max Load is 1710 Watts and requires a 24-inch deep rack for mounting.
    Load Shedding - When using an OvrC Enabled UPS, if an outlet mode is set to “Reset Only,” it is ineligible for load shedding. Set the outlet mode to “Normal” to enable the outlet to shed its load.


    Wattbox OvrC Info banner
    @@altText
    OvrC Capability

    Connect your WattBox IP conditioner to the single outlet of this UPS, and you’ll get a powerful UPS, plus OvrC functionality. With OvrC, you’ll receive vital notification to help keep you one step ahead of your clients. You’ll be alerted when AC power is lost and restored or when voltage levels fall outside the safe range. Plus, you can monitor battery health, battery charge percentage, voltage levels, and current run time ¬– all from the WattBox user interface.

    @@altText
    Load Shedding Configuration

    With a connection to a WattBox product, this UPS can control outlets based on battery charge percentages. You can view these critical and non-critical percentages through the WattBox user interface, and prioritize components via OvrC.

    @@altText
    Large Multifunction LCD Readout

    The multifunction LCD readout provides ready access to power/battery condition vitals such as Runtime and Load. Plus, it incorporates an auto-dimming function, which helps minimize distractions when in use.

    Battery Health Notification

    A battery health notification alerts you when the battery condition has weakened, promoting proactive battery replacement. This UPS is also designed with user-replaceable batteries, so the battery needed for this unit can easily be found at a local battery store.

    Automatic Voltage Regulation (AVR) Technology

    Keep equipment operating safely and protect against voltage fluctuations with automatic voltage regulation (AVR). This innovative technology prevents any voltage drops below 112 volts and any spikes or surges above 128 volts. This unit uses Boost/Buck Topology, which actively corrects brownouts and over-voltages to usable levels, while maintaining a full battery charge in case of power failure.

    EMI/RFI Shielding

    Protecting against electromagnetic interference and radio frequency signals helps prevent line noise or "humming" that can occur over audio electronics.

    Graceful Shutdown

    With Graceful Shutdown, you can fully protect your computer system, components, peripherals, and data via USB port. In the event of a power loss, this UPS automatically instructs the computer to save your files and then safely shuts it down in an intelligent and orderly matter, avoiding costly damage to critical components.

    FEATURES

    • Pair with any IP enabled WattBox power conditioner to provide OvrC capability
    • Program load shedding and battery health awareness

    SPECIFICATIONS

      WB-OVRC-UPS-2000-1
    Battery Recharge Time 4 Hours
    Battery Runtime @ Full Load 5.2 Minutes
    Battery Runtime @ Half Load 15.5 Minutes
    Battery Size 12V/9AH
    Current Rating 20A
    Energy Dissipation (Joules) 1080
    Outlets 1
    Overload Protection Yes
    Battery Type Sealed Lead Acid
    Color Black
    Features Multifunction LCD Diagnostic Display Includes: OvrC, Output Voltage, Battery Backup Time Limit, Battery Total Amp Hours, Exit Setup, ECO mode, Buck Mode, Boost Mode, Battery Mode, Standby Mode, backup time, configuration info, fault/warning info, Mute, O
    Power Rating 1710W (Max)
    Line Voltage 110 / 120V AC
    Rack Mountable Yes
    Rack Spacing 2U
    Battery Runtime Based on Load In Minutes
    100%: 0:03:42
    90%: 0:04:37
    80%: 0:05:44
    70%: 0:06:88
    60%: 0:08:85
    50%: 0:11:63
    40%: 0:15:76
    30%: 0:22:59
    20%: 0:36:69
    10%: 0:73:82
    Dimensions (W x H x D) 17.24" x 3.46" x 20.08"
    Weight 54.80 lbs
    h3>SUPPORT
    Manuals and Guides
    Software and Firmware
    Click here for the most up-to-date firmware.
    *
    *
    *
    Products specifications
    OvrC Enabled Yes
    Number of Outlets 1
    Type UPS
    Product tags
    • (6042)