LUTRON - CASETA WIRELESS 1000W IN-WALL DIMMER (WHITE)

FEATURES

The CasétaR Wireless In-Wall Dimmer PRO provides dimming of multiple load types and, when paired with Pico® remote controls, allows remote control from anywhere in the space.

When used with the Lutron® Smart BridgeTM or Smart BridgeTM Pro, the CasétaR Wireless In-Wall Dimmer PRO may be programmed via the Lutron® app, incorporated into lighting scenes, scheduled for daily events, and controlled from anywhere in the world1.

Lutron® patented Clear Connect® RF Technology works through walls and floors, Includes Front Accessible Service Switch (FASSTM) for safe lamp replacement.

Neutral-optional dimmer is ideal for retrofit applications when used in two-wire mode. Compatible with Lutron® Hi-lume® A-Series LTE LED driver, PHPM interfaces and GRX-TVI interfaces.

Neutral wire is required for drivers and interfaces.

Works with compatible dimmable LEDs as well as incandescent, halogen, and halogen-based MLV loads and it is compatible with dimmable ballasts

SPECIFICATIONS

Regulatory Approvals

• cULus Listed
• NOM certified
• FCC approved. Complies with the limits for a Class B digital device, pursuant to Part 15 of the FCC Rules
• Industry Canada certified
• IFTEL certified

• Operating voltage: 120 V~ 50/60 Hz
Key Design Features*
• Tested to withstand electrostatic discharge without damage or memory loss, in accordance with IEC 61000-4-2.
• Tested to withstand surge voltages without damage or loss of operation, in accordance with IEEE C62.41-1991 Recommended Practice on Surge Voltages in Low-Voltage AC Power Circuits.
• Dimmers always operate locally and do not require system control.
• Power failure memory: should power be interrupted, the control will return to its previously set level prior to the interruption when power is restored.
• Uses LutronR ClaroR wallplates or designer-style wallplates from other manufacturers. Wallplates are sold separately.
• LutronR ClaroR wallplates snap on with no visible means of attachment.
• Requires a 1-gang U.S. wallbox. 31 /2 in (89 mm) deep recommended, 21 /4 in (57 mm) deep minimum.
• Green LEDs indicate load status.

System Communications and Capacity

• The CasétaR Wireless In-Wall Dimmer PRO communicates with PicoR remote controls and Lutron Smart BridgeT or Smart BridgeT Pro via radio frequency (RF).
• The CasétaR Wireless In-Wall Dimmer PRO must be located within 60 ft (18 m) line-of-sight or 30 ft (9 m) through walls, of PicoR remote controls and Smart BridgeT or Smart BridgeT Pro.
Device limits
• PicoR remote controls only: up to 10 PicoR remote controls may be paired to each CasétaR Wireless In-Wall Dimmer PRO (with no Smart BridgeT installed).
• Smart BridgeT or Smart BridgeT Pro system: up to 50 total wireless devices (CasétaR Wireless dimmers/ switches, PicoR remote controls) are supported per system. Smart BridgeT or Smart BridgeT Pro counts as one device.

Environment

• Ambient operating temperature: 32 °F to 104 °F (0 °C to 40 °C), 0%-90% humidity, non-condensing. Indoor use only.